2011-08-22

Green Clean Lens Cleaner


Concept: 3 out of 5
Execution: 4 out of 5
Yeah, but: Sometimes reusable isn't better.

The Long Version: I'm hardly an influential and famous reviewer, so when the North American distributor of the European "Green Clean" brand offered to let me try out some products that are just arriving on this continent, I couldn't skip the chance. This is the first review of three; over the next week or so I'll also be looking at their sensor swabs and a neat dust-removal method. But first up is their Green Clean Lens Cleaner.

There's a huge range of accepted methods for lens cleaning. Some photographers are meticulous to the point of wearing cotton gloves, while others will just wipe a visibly soiled lens on the back of their tie. (I exaggerate, of course – when was the last time a photographer wore a tie?) I admit that I fall somewhere toward the casual side of the spectrum; I usually just breathe on the lens to fog it and then give it a wipe with a handy micro-fibre cloth. Following Keith's review, I did pick up some Zeiss pre-moistened lens wipes. They've served me well, but when they're fresh I found that they would leave streaks that would still need to be removed with a dry cloth, possibly introducing new problems and negating the scratch-preventing benefit of the disposable wipe. The Green Clean Lens Cleaner solves that problem by combining a disposable wet and dry soft tissue in each packet.


To give it a bit of a test I took my Nikon 35mm f/2D lens and liberally flicked water drops all over the front element. As this hack job of a before-and-after photo shows, the Green Clean wipes weren't challenged by this at all; I also cleaned my eyeglasses at the same time, which is a great way to discover streaking. No problem.

I hadn't really expected such a simple task to stump the lens wipes, so I had another nefarious plan in progress. I took a glass of warm water and added sea salt until it was decidedly unpleasant to taste, and then did a number on three budget UV filters that I had lying around. They are Hoyas in 55 and 95mm, and a non-name "Topaz" filter in 82mm. Here's what they looked like after I was done spritzing them:


Of course, if your filter or front element has this much salt-water sprayed on it then your camera probably has bigger problems than a lens wipe can solve, but no matter: I wanted a torture test. I set these filters out to dry and harden under the gentle breeze of the air conditioner for a few days, and then tried my different cleaning methods on each one.


For the 55mm I used my typical huff-and-hanky cleaning method, and I wasn't at all surprised to see that it left a lot of the salt behind. Perhaps this is better than nothing, but probably not better enough to make any substantial difference. These before-and-after photos are actually quite flattering: all I really managed to do was average the salt out and send a perfectly good microfiber cloth off to the washing machine before its time.


I used a Zeiss wipe on the 82mm filter. The alcohol-moistened tissue did a good job of removing the salt, to the point where the filter looked mostly clean. However, a closer inspection and a different angle shows a lot of streaking and salt residue left behind.


The results from a single Zeiss wipe might have been enough to keep shooting without visible smudging of the photos, but I'd really want a second cleaning with another Zeiss wipe before I'd trust that filter with any important images. Since my year-old wipes can still leave streaks even when the lens isn't salt-encrusted, a third step to polish the lens with a microfiber cloth would probably also be needed.


The photo above is the before-and-after for the 95mm filter, which I cleaned with the Green Clean wet and dry wipes. The process is absolutely simple: open and wipe with the wet cloth, discard; open and wipe with the dry cloth, discard. For those who belong to the "You'll shoot your eye out!" school of lens scratch prevention, having a clean single-use tissue for each step is a tremendous coup.


The drying step makes a huge difference to the result: no streaking and no residual salt. In fact, I used the same wet and dry wipes to clean the residue from both of the other filters, with equally good results even though the 'dry' one was pretty damp by the end of it. I was prepared to be forgiving if the Green Clean couldn't handle this challenge, but I was impressed.

I'm going to continue using one of my ever-present microfiber cloths for light routine cleaning of my eyeglasses, camera lenses, and watches. My remaining stock of Zeiss tissues will spend the rest of their days cleaning the screen on my phone and serving as impromptu wet-naps. But for getting rid of smudges, oils, or any sort of residue from my optics, I'll definitely be buying a box of the Green Clean wet/dry wipes as soon as they hit the market.


This review introduces the "Review Sample" tag to mark that this isn't a product that the reviewer has personally purchased. The Green Clean products used in this review have been provided at no cost by the North American distributor for evaluation. However, anything that isn't consumed in the product testing is returned, and there is no financial relationship or incentive involved. But as always, the usual `thewsreviews disclaimer still applies.


last updated 22 aug 2011

2011-08-19

Panasonic's TS3 Floating Strap and Silicone Skin


Concept: 3 out of 5
Execution: 3 out of 5
Yeah, but: The best gets even better accessorized.

The Long Version: English is full of three-word phrases that have special meaning and significance, but few are more touching than "Free With Purchase". Panasonic Canada has taken it upon themselves to release a silicone skin and floating strap for the TS3, and for a while was even giving it out for free to people who had already bought the camera. How cool is that?

Officially called the "DMW-TS3 Kit", there's almost no information about this accessory bundle online, and what little there is all seems to be from Canada. Sorry, rest of the world – but perhaps there's something better scheduled for you.


The silicone skin is that translucent milky-white that makes me wish I had never heard Ray Beschizza say the phrase 'the colour of semen'. Otherwise it's very nicely made, fitting the camera perfectly with crisp cut-outs for the controls, LCD, and lens. The material adds tremendously to the grippiness of the camera and takes it even farther by putting circular depressions across the hand grip.

The floating strap is fabric-covered neoprene that's orange on the outside and blue on the inside, nicely complimenting the most popular camera colours. (If you bought their dirty-lipstick-red colour, well, what did you expect?) When the camera hits the water the strap is plainly visible and stands about an inch above the surface, making it easy to grab. It doesn't tighten down the way the string wrist strap does, but it fits my average-sized wrist snugly and the broad band keeps it in place.


Naturally, there are a couple more things that need to be said. The silicone skin blocks the camera's battery and card slot, which should help to keep sand way from the locking mechanism, but it needs to be pulled aside for access. It also traps water beneath it, so it needs to be completely removed if the camera has been immersed. The grippiness of the silicone also makes it more difficult to put in a case or a pocket, so even though it adds shock and scratch protection, I may not use it most of the time.

The floating strap, which stays wet for a really remarkably long time, is too big to pass through the skin's little cutout for the attachment point. Instead it uses a quick-release clip on its tether; if the standard strap used the same clip life would be easier, but instead the strings need to be unlooped from the camera the hard way. It's tough to casually switch back and forth, but the floater is certainly worth putting on before getting into the canoe. The other alternative is to daisy-chain the floating strap to the original one, which is what I'll do when I just want to throw the camera into the pool.


I have to say that I'm really happy with the strap and case, and it's worth checking with your local camera store to see if they're offering it as well. Do be warned, though, that some stores would rather sell these accessory kits for $30 each. I can't blame them, and it's a good kit – the floating strap is the best I've seen – but I really was handed mine for free just because I'd already bought the matching camera. Naturally, Panasonic's website makes no mention of any special offer for present or future owners of the TS3; I'll add more detailed information if I can get it.

updated december 2011:  not everything that I write can withstand the test of time. When I wrote this Panasonic was providing this for free from a few special retailers, but unfortunately that program has come to an end. I can still say that this is the best floating strap that I've seen, and very good silicone skin, but whether that's worth the $30 that these kits now retail for is a personal matter. I'd probably have bought it, just to have the dedicated accessories, but they do have their specific niche.


last updated 15 dec 2011

2011-08-17

Filzer I-Tool MT4


Concept: 3 out of 5
Execution: 4 out of 5
Yeah, but: Finally, a stellar bike tool that isn't riding a fixie.

The Long Version: Filzer's classic I-Tool is one of those little things that has been done right. It's a simple tool with five hex drivers with a T25 torx, slot, and philips screwdrivers. These eight tools fold flat into a package that's comfortably under 3" long, about 1" wide, and one-quarter of an inch thick. It's so small that it can be carried anywhere, and it's so easy to use that I'll often reach for it instead of a dedicated hex wrench set. It can do almost anything I need.

The bits don't lock in place, and their short size makes that an advantage. I have no problem putting plenty of leverage on the tool at ninety degrees and then smoothly reversing the tool for another crank, or bringing it straight up to quickly move a loose bolt. Naturally that doesn't work so well with the screwdriver bits, but the basic theory is still good.


The "Skin-E1 I-Tool" isn't perfect – aside from the name, which thankfully doesn't appear anywhere on the item, the Philips screwdriver suffers from being a #1 instead of the more common #2 size. It's a necessary concession to the form factor, and a #1 size is better than nothing, but it's the only thing that has disappointed me when I've tried to do quick tune-ups on my bike.

Of course such a little tool can't do everything, and this MT4 model – yes, it has a code in addition to the horrid name – is just about the simplest one that Filzer makes. It's a natural to combine with another tool, either a small pliers-based multitool or a more complex bike tool kit. I carry both of those in my pannier as well, but I reach for the little I-Tool first.


last updated 17 aug 2011

contact me...

You can click here for Matthew's e-mail address.